The complete naming of cables is usually quite complex, so people sometimes use a simple name (usually a category name) combined with the model specification to replace the complete name, such as "low-voltage cable" representing all plastic-insulated power cables of the 0.6/1kV class. The product range of wires and cables is relatively complete; it can be said that as long as the standard model specification of the wire or cable is written, the specific product can be identified. But what is its complete naming?
Naming Principles
The naming of wire and cable products follows these principles:
1. Contents included in the product name
(1) Product application or category name
(2) Product structural material or type
(3) Important or additional features of the product
The naming is basically in the above order. Sometimes, to emphasize important or additional features, the features are written before the corresponding structural description.
Order of Structural Description
The product structural description follows the principle of inside to outside: conductor --> insulation --> inner sheath --> outer sheath --> armor type.
Where there is no risk of confusion, some structural descriptions are omitted or simplified, such as aluminum conductors not allowed in automotive wires or flexible wires, so the conductor material is not described.
8.7/15kV Flame-Retardant Copper Core Cross-Linked Polyethylene Insulated Steel Tape Armored Polyvinyl Chloride Sheathed Power Cable
"Rated Voltage 8.7/15kV" – Application/Voltage Rating
"Flame Retardant" – Emphasized Feature
"Copper Core" – Conductor Material
"Cross-Linked Polyethylene Insulation" – Insulation Material
"Steel Tape Armor" – Armor Layer Material and Type (Double Steel Tape Gap Wrapping)
"Polyvinyl Chloride Sheath" – Inner and Outer Sheath Materials (Inner Sheath Material is Omitted as it is the same for both)
"Power Cable" – Product Category
