Product Overview
 

Knife Disconnect Terminal Blocks provide safe, tool-operated circuit isolation for industrial control panels, measurement systems, and power distribution units. By separating the current path without disconnecting field wiring, technicians can perform testing, commissioning, and maintenance safely. Built with precision copper alloy current bars and flame-retardant polyamide housings, these blocks ensure low contact resistance and long-term mechanical stability in high-vibration industrial environments.

 

 
  • XCDS-2.5 Disconnect Terminal Block
    The XCDS-2.5 is a 2.5 mm^2 knife-disconnect terminal block engineered for industrial control panels where safe, visible circuit isolation is required. Featuring an integrated disconnect lever, it...
    view more
  • XCDS-25 Disconnect Terminal Block
    The XCDS-25 Disconnect Terminal Block is engineered for industrial control panels, instrumentation circuits, and automation systems requiring secure signal isolation and routine testing. Featuring...
    view more
  • XCDS-10 Disconnect Terminal Block
    The XCDS-10 is a 10 mm2 (6 AWG) knife disconnect terminal block designed for 35 mm DIN-rail mounting in industrial control panels, instrumentation loops, and power distribution systems. It...
    view more
  • XCDS-16 Disconnect Terminal Block
    The XCDS-16 is a 16 mm2 knife-disconnect terminal block engineered for safe, tool-operated circuit isolation in industrial control panels. Featuring a hinged disconnect blade, it allows...
    view more
  • XCDS-6 Disconnect Terminal Block
    The XCDS-6 is a 6 mm² slide-type disconnect terminal block for electrical control panels, switchgear, and power distribution assemblies.
    The terminal block uses an M4 bolt connection for...
    view more
  • XCDS-4 Disconnect Terminal Block
    The XCDS-4 is a 4 mm², 6.2 mm wide DIN rail-mounted knife disconnect terminal block. Engineered for industrial control and instrumentation circuits, it allows technicians to isolate individual...
    view more
 
Key Features
 

Positive Disconnection Zone: Clearly visible knife-disconnect mechanism provides unambiguous open/closed status for maintenance safety.

 

Low Contact Resistance: Current bars stamped from high-conductivity electrolytic copper with tin/nickel plating limit voltage drop and thermal hotspots.

 

Vibration-Resistant Screw Clamping: Engineered clamp design maintains constant contact force, preventing wire loosening under continuous mechanical shock.

 

Modular Plug-In Bridges: Standardized FBS jumper channels enable fast potential distribution across adjacent terminals, reducing wiring labor time.

 

Robust Insulation Housing: Molded from virgin PA66 engineering plastic, offering UL 94 V-0 flammability ratings and high tracking resistance (CTI > 600).

 

Product Range

 

Series Code

Connection Type

Rated Voltage (IEC/UL)

Rated Current (IEC/UL)

Wire Size Range

Disconnect Type

DTB-S2.5

Screw Clamp

500V / 300V

20A / 16A

0.2 - 4 mm^2 (24–12 AWG)

Knife Disconnect

DTB-P2.5

Push-In / Spring

500V / 300V

20A / 20A

0.14 - 4 mm^2 (26–12 AWG)

Lever Disconnect

DTB-S4

Screw Clamp

630V / 600V

32A / 30A

0.5 - 6 mm^2 (20–10 AWG)

Knife Disconnect

DTB-S6

Screw Clamp

800V / 600V

41A / 40A

0.5 - 10 mm^2 (20–8 AWG)

Heavy-Duty Knife

 

Technical Specifications

 

Housing Material

Polyamide 6.6 (PA66), Halogen-free

Flammability Rating

UL 94 V-0

Metal Parts

Electrolytic copper alloy, corrosion-resistant passivated zinc plating / nickel-tin plating

Operating Temperature

-40°C to +105°C

Stripping Length

8 mm to 12 mm (depending on model)

Mounting Type

Standard DIN Rail NS 35/7.5 and NS 35/15 (EN 60715)

Compliance & Certifications

CE, UL 1059, CSA C22.2 No. 158, IEC 60947-7-1, RoHS, REACH

 

Applications
2EDGV-5.08 Plug-in Type Terminal Block

Industrial Automation Panels

Control cabinet signal loops requiring quick sensor/actuator isolation during fault finding.

15EDGKA-3.81 Plug-in Type Terminal Block

Process Instrumentation

Measurement and control circuits where current loops must be opened for calibration without rewiring.

142V-5.08 PCB Spring Terminal Block

Power Distribution Units

Auxiliary control circuits in switchgear assemblies requiring clear circuit separation points.

2EDGKM-5.0 Plug-in Type Terminal Block

Machine Tool Builders

CNC machine control architectures subject to continuous mechanical vibration and electrical noise.

 

 
 
Customization & OEM/ODM
01.

Color Customization

Standard grey, blue, and earth-yellow/green available; custom housing colors for specific voltage zoning or brand identity.

02.

Laser Marking

Custom terminal part numbers, circuit diagrams, or terminal designations permanently laser-etched onto housing surfaces.

03.

Pre-Assembled DIN Rail Assemblies

Custom-configured terminal strips complete with end brackets, partition plates, and jumpers built to customer schematic drawings.

04.

Tooling & Mold Development

In-house mold fabrication department supports rapid prototyping and custom terminal block design based on specific dimensional or electrical constraints.

 

Manufacturing & Quality Control

 

Automated Metal Stamping: High-precision progressive stamping presses ensure tight dimensional tolerances on current bars and clamping yokes.

 

Virgin Raw Material Processing: Injection molding utilizing 100% virgin PA66 resin with automated drying systems to prevent structural defects and moisture retention.

 

In-House Laboratory Testing:
• Dielectric Strength Test: Withstands power-frequency withstand voltage up to 2.5 kV / 50 Hz for 1 minute.
• Temperature Rise Test: Verified to remain within 45K temperature rise limits at full rated continuous current per IEC standards.
• Vibration & Mechanical Shock Test: Tested up to sinusoidal vibration frequencies (5–150 Hz) to confirm contact stability.
• Salt Spray Corrosion Test: 96-hour neutral salt spray test on metallic components to verify plating integrity.

2EDGRM-7.5 Plug-in Type Terminal Block

 

 

Frequently Asked Questions

 

Q: What is the main difference between knife-disconnect and lever-disconnect terminal blocks?

A: Knife-disconnect blocks utilize a hinged metal blade opened with a flathead screwdriver, ideal for compact high-density spaces. Lever-disconnect blocks feature an integrated finger-operated plastic lever, enabling rapid tool-free wire isolation during frequent testing.

Q: Can these terminal blocks be bridged across non-adjacent terminals?

A: Standard plug-in insertion bridges (FBS series) are designed for adjacent terminals. For skipping terminals, custom cut-to-length jumpers or individual jumper poles can be utilized.

Q: What is the maximum tightening torque for screw-clamp disconnect blocks?

A: For 2.5 mm^2 blocks (DTB-S2.5), the recommended tightening torque is 0.5 - 0.6 Nm. Over-torqueing can damage the clamping screw threads or deform the current bar.

Q: Are these terminals compatible with standard European DIN rails?

A: Yes, all models are designed to snap onto standard 35 mm DIN rails conforming to EN 60715 (both NS 35/7.5 and deep NS 35/15 profiles).

Q: What documentation is provided for regulatory compliance audits?

A: We supply complete IEC 60947-7-1 test reports, UL certification certificates (File E-number available upon request), RoHS declaration sheets, and 3D CAD STEP files for panel layout integration.

Q: What is your standard production lead time for bulk orders?

A: Standard catalog items in standard colors maintain stock for shipment within 3 to 7 business days. Custom color molding or pre-assembled DIN rail harness orders typically require 2 to 3 weeks depending on volume.

 

modular-1
RFQ / Inquiry CTA

Ready to source reliable knife disconnect terminal blocks for your project? Submit your specifications, annual volume projections, or bill of materials (BOM) to our engineering team. Download technical datasheets and 3D CAD STEP files for immediate layout integration.
Download Resources: [Request PDF Datasheet & 3D CAD STEP Files]
Request a Quote / Sample: [Insert Inquiry Form / Email Link]
Direct Engineering Support: [Insert Direct Contact Email]

As one of the most professional disconnect terminal block manufacturers in China, we're featured by quality products and good service. Please rest assured to buy bulk customized disconnect terminal block made in China here from our factory. Contact us for pricelist and free sample.

Send Inquiry
Contact usif have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!