XC2EDGVM-5.0 Pluggable Terminal Block:
Here are the steps provided by XC Technology for connecting wires:
1.Strip 6-8 mm of insulation from the wire.
2.Insert the exposed wire into the terminal block, ensuring it is fully seated.
3.Tighten the screw at the top of the terminal block with a screwdriver to secure the connection.
4.Gently pull on the wire a few times to ensure it is firmly secured.
5.Always disconnect the power supply before connecting the terminal block to ensure safe wiring.
For any technical questions regarding terminal blocks, please feel free to contact us.
| UL/CUL Techical Date | |||
| Use Grroup | B | C | D |
| Rated Voltage(V) | 300 | . | 300 |
| Rated Current(A) | 10 | . | 10 |
| Wire Range Solid/Stranded(AWG) |
24-12 | ||
| Withstanding VOLTAGE | 1600V/Min | ||
| IEC Techical Date | |||
| Overvoltage Category | Ⅲ | Ⅲ | Ⅱ |
| Contamination Class | 3 | 2 | 2 |
| Rated Voltage(V) | . | 320 | 630 |
| Rated Current(A) | . | 15 | 15 |
| Impulse Withstand Voltagea(KV) | . | 4.0 | 4.0 |
| Conductor cross section Solid/Flexible(mm³) |
2.5 | ||
| Material | |||
| Lnsulation Material | PA66 | ||
| Lmflammability | UL94V-0 | ||
| Contactor Material | Copper alloy | ||
| Contactive Coating | Tin plated | ||
| Mechanical | |||
| Pitch (mm) | 5.00 | ||
| Poles (p) | 2-24 | ||
| Stripping Length(mm) | . | ||
| Screw/Torque(Max)(N.M) | . | ||
| Operating temperatur(℃) | -40-+105 | ||
| Pin Dimensions | . | ||
| PCB Hole Diameter(mm) | . | ||
Hot Tags: 2edgvm-5.0 plug-in type terminal block, China 2edgvm-5.0 plug-in type terminal block manufacturers, factory, 2EDGV 5 0 Plug in Type Terminal Block, 2EDGRM 7 62 Plug in Type Terminal Block, 15EDGVM 3 5 Plug in Type Terminal Block, 2EDGKB 7 5 Plug in Type Terminal Block, 15EDGKA 3 5 Plug in Type Terminal Block, SV 3 5 Pluggable Terminal Block
